I have theoretical question that concerns the VSANs. If I can configure up to 254 user VSANs, how can I assign unique Domain ID to each of them, if I have the limitation of 239 domains. Thank you for the attention.
You aren't limited to having unique DID if the vsans don't touch. Each vsan is completely unique and vsan X, domain Y is completely different than vsan A, domain Y. Imagine that if the sans are physically separated, then domains do not need to be unique. So, when you logically separate them, they are still separate and can have the same domain.
If you think about it from an IP network point of view, the vlan A can have the same IP subnet as vlan B if they never attempt to contact each other or route between them.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...