i have snmp manager that is trying to poll the 9216 device. It fails even though i have the community set..besides the standard snmp setup with community is there anything else i have to do to allow the manager to poll this device?
I had issues with this when I first got the MDS's. I finally gave in and turned on snmp v1 as such and that solved the problem with polling. I was using Netview (oh for Openview NNM) and it could not do much with SNMP v2 and heaven knows v3 is way to difficult for Netview. I suppose you need to figure out what level of SNMP you require at your site and then figure out what your manager can do with it.
Just for interests sake, is your switch able to send traps to your manager even though you can't poll it?
If you have not looked at the SNMP setup on the MDS, check out:
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...