migrating IOS to NX-OS equivalent command snmp-server enable traps config
I am trying to figure out what is the equivalent command to configure the IOS "snmp-server enable traps config" on a Nexus 5020 running NX-OS version 4.2.1.N2.1 ,can someone please help me with this problem.
Also I would like to know if there is a cisco howto document or tool to migrate from IOS to NX-OS ?
Re: migrating IOS to NX-OS equivalent command snmp-server enable
both Nexus 5k are not generating a trap after a config change, because on both Nexus running same NX-OS version show up the snmp-server enable traps config command. This is really strange behavior, because we are using the same software version for the Nexus 5k devices it doesn't make sense to me. In the meantime I checked the command line guide for this software version but the command wasnt showing up.
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...