Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

More Zone merge questions.

I am merging pur Dev switch with our Prod switch. Each have very similar zonesets in vsan2. They do have uniques zones but the zoneset name is the same.

I want to make sure that my settings are correct so when I ISL the swithces that the zones from Dev propegate to Prod. I am confuesd if I have to use the zone copy vsan 2 active-zoneset comman or not. I know once the merge is complete i have to save the running config into startup.

I just want to make sure VSAN2 on dev does not overwright VSAN2 in prod. Read all the documents. My configs are below

Production

VSAN: 2 default-zone: deny distribute: active only Interop: default

    mode: basic merge-control: allow

    session: none

    hard-zoning: enabled broadcast: disabled

Default zone:

    qos: none broadcast: disabled ronly: disabled

Full Zoning Database :

    DB size: 70988 bytes

    Zonesets:1  Zones:488 Aliases: 130

Active Zoning Database :

    DB size: 32724 bytes

    Name: Kforce_Zoneset  Zonesets:1  Zones:480

Status: Activation completed at 13:25:18 EST Jul 30 2012

Development (to be merged into production)

Ybor-Top-Switch-RYC1SS01# show zone status vsan 2

VSAN: 2 default-zone: deny distribute: active only Interop: default

    mode: basic merge-control: allow

    session: none

    hard-zoning: enabled broadcast: disabled

Default zone:

    qos: none broadcast: disabled ronly: disabled

Full Zoning Database :

    DB size: 18940 bytes

    Zonesets:1  Zones:129 Aliases: 44

Active Zoning Database :

    DB size: 8596 bytes

    Name: KFORCE_ZONESET  Zonesets:1  Zones:129

Status: Activation completed at 17:58:29 UTC Jul 30 2012

Everyone's tags (3)
2 REPLIES
Cisco Employee

More Zone merge questions.

Community Member

More Zone merge questions.

I did read this. My only concern is the fact that my actirve zoneset have the same name

One is Kforce_Zoneset and the other is KFORCE_ZONESET. Other than that should be easy I was thinking

422
Views
0
Helpful
2
Replies
CreatePlease to create content