I would use for management, ev. vmotion a old fashioned vswitch, and N1k only for the VM data traffic. Whatever happens with the DVS, you still have connectivity.
It is always questionable, what the benefit of JF is, specially for NFS. I have seen values between 10-25 %; however, I would be paranoid to quote any numbers. The gain for vmotion is definitely great.
Check if JF is working end to end, setting the no fragment bit. Not setting this flag might give you misleading results; a intermediate switch/router might have to fragment.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...