I have one Nexus 7000 with a fcoe supported blade N7K-F132XP-15.
Want to deply this in the LAB. I created a fcoe port for test purpose which is working. But some things are not very clear to me. I am pointing them below.
How to create the interface membership for storage VDC. Right now i created shared interfcae with the default VDC. But can i create the interfcae dedicated? What is the difference between when the interface is shared and dedicated ?
Also, on my shared interfcae while configuring FCoE port, it did not allow me to create priority flow control settings. See the error below.
fcoe-dvt(config-if)# priority-flow-control mode auto
ERROR: pfc config not allowed on shared interface (0x1a000000)
On Nexus 5020, we have priority flow control settings as "auto" for eahc fcoe interface. In the nexus 7000 case, i dont know what and how priority flow control is taking place.
Any white paper on Nexus 7000 fcoe will be greatly appreciated.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...