Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No Fabric Login with virtualized WWN

Hi there,

I have virtualized my CNA WWNs to

WWNN=50:00:00:00:00:00:00:c1

WWPN=50:00:00:00:00:00:00:c0

and it looks like there is no Fabric Login possible anymore.

The Nexus 5020 keeps suspending the VFC because of too many invalid FLOGIs.

Does anyone have an idea why?

The response to the FLOGI I see with Wireshark is an LS_RJT (LinkService Reject) but

unfortunately it only contains an unknown reason code. So no help from this side.

Is there anything special about the used WWNs? Because if I use these WWNs on a FC HBA in conjunction wioth a Brocade Fabric

it works perfect. Any hint is highly welcome.

Thx!

Everyone's tags (3)
2 REPLIES

Re: No Fabric Login with virtualized WWN

post your FCoE config for review.

New Member

Re: No Fabric Login with virtualized WWN

I found the problem:

hpc-nexus5020(config)# show flogi internal errors

2) Event:E_DEBUG, length:145, at 605759 usecs after Mon Aug 22 13:31:59 2011

    [102] Err(NAA=5 and IEEE Company ID is zero)invalid nport name 50:00:00:00:0

0:00:03:10 from interface vfc1; node name is 50:00:00:00:00:00:03:11.

The WWN has to be compliant to the following rules:

http://howto.techworld.com/storage/156/how-to-interpret-worldwide-names/

892
Views
5
Helpful
2
Replies