Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NPV internal FLOGI rejected by the upstream switch?

Trying to connect 9124e blade switches to 9513 core switch.

cfs distribution enabled

vsans matches

on 9124e

     - npv enabled

     - host ports set to F

     - external uplinks set to NP

     - flex-attach enabled on host ports

on 9513

     - npiv enabled

     - ports set to F

now the uplink ports and ports and core switch are stuck in "init" state and npv status as follows

#show npv status

npiv is disabled

disruptive load balancing is disabled

External Interfaces:
====================
  Interface:   ext1, State: Failed(NPV internal FLOGI rejected by the upstream switch, Reason: 0x5, Reason Expl: 0x0)
  Interface:   ext2, State: Failed(NPV internal FLOGI rejected by the upstream switch, Reason: 0x5, Reason Expl: 0x0)

  Interface:   ext3, State: Pre-Initialized
  Interface:   ext4, State: Pre-Initialized

  Number of External Interfaces: 4

Server Interfaces:
==================
  Interface:   bay6, VSAN:  100, State: Waiting for External Interface
  Interface:   bay5, VSAN:  100, State: Waiting for External Interface
  Interface:   bay7, VSAN:  100, State: Waiting for External Interface
  Interface:   bay4, VSAN:  100, State: Waiting for External Interface
  Interface:   bay3, VSAN:  100, State: Waiting for External Interface
  Interface:   bay2, VSAN:  100, State: Waiting for External Interface
  Interface:   bay1, VSAN:  100, State: Waiting for External Interface
  Interface:   bay8, VSAN:  100, State: Waiting for External Interface

Any clues?

Everyone's tags (7)
1 REPLY
New Member

Re: NPV internal FLOGI rejected by the upstream switch?

The issue resolved. VSAN parameters were incompatible

http://blog.kiranghag.com/2010/08/npv-internal-flogi-rejected-by-upstream.html

2576
Views
0
Helpful
1
Replies