With exchange-based load balancing, how is the link within the port-channel selected for each exchange? Is it round robin or is there something more intelligent?
We are using FCIP with two links with diverse routes. So the port-channel has 2 members, one with a rtt latency of 4ms and one with 14ms. Will half of the frames encur the 14ms latency or will more traffic use the lower-latency link?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...