Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Port speed issue

Hi All,

Am I getting the following error on more than one port while changing the port speed from 2G to 4G on 9509.

Event:E_DEBUG, length:121, at 43883 usecs after Thu Jan 8 15:02:27 2009 [102] Ifindex (fc8/8)0x1387000, Err disabled (0x40290065) event (PI_FSM_EV_LCP_SET_PORT_CFG_RESP_RCVD)0xb8 due to Elsspc

Switch is working fine @2G. All other ports are set to 2G (Shared)

Any suggestion..?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Port speed issue

Check the SFP installed in port 8/8 to be sure it is 4GB capable.

If it is, repost and we can dig deeper.

Hope this helps,

Mike

2 REPLIES
Cisco Employee

Re: Port speed issue

Check the SFP installed in port 8/8 to be sure it is 4GB capable.

If it is, repost and we can dig deeper.

Hope this helps,

Mike

New Member

Re: Port speed issue

Hello,

What model line card is it? What else do you have pulled into the port group and running at what speed?

Thank you.

360
Views
0
Helpful
2
Replies
CreatePlease to create content