Re: "Restrict Broadcast frames to Zone Members" Question
Yes using the Broadcast attribute on a zone can cause failures when the various MDS in a VSAN are running different versions of SAN-OS or NX-OS. I would not recommend using this check box when creating zones. I have never seen a need for using broadcast in a zone. I have seen several instances where this was enabled by mistake, and it caused failures when activating a zoneset on the VSAN.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...