11-02-2010 01:10 AM
Hello,
I would like to make a report where the port number and ficon number are given.
The device manager shows me the relationship but I cannot report it (unless I do a printscreen)
The fabric manager reports don't show ficon numbers
The Fabric Manager Web Client allows me to create reports, but still no Ficon number
On Cisco CLI - Command Line Interface "show interface" shows a Ficon tag but this is not a Ficon number
Something like this
Port number Ficon port description
fc3/2 32 a portdescription
How ?
Regards,
Ivy
Solved! Go to Solution.
11-02-2010 01:31 AM
Hi Ivy,
You may want to try below commands: {X: is the FICON VSAN }
#show ficon vsan X portaddress brief
#show ficon vsan X portaddress {for detailed FICONport #s and descriptions}
I hope this answers your question.
Thanks,
Ozden
11-02-2010 01:31 AM
Hi Ivy,
You may want to try below commands: {X: is the FICON VSAN }
#show ficon vsan X portaddress brief
#show ficon vsan X portaddress {for detailed FICONport #s and descriptions}
I hope this answers your question.
Thanks,
Ozden
11-02-2010 01:51 AM
Hello,
Thank You for the help.
It gives me the desired report!
Ivy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: