Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

report with port & ficon number relationship

Hello,

I would like to make a report where the port number and ficon number are given.

The device manager shows me the relationship but I cannot report it (unless I do a printscreen)

The fabric manager reports don't show ficon numbers

The Fabric Manager Web Client allows me to create reports, but still no Ficon number

On Cisco CLI - Command Line Interface "show interface" shows a Ficon tag but this is not a Ficon number

Something like this

Port number     Ficon     port description

fc3/2                32         a portdescription   

How ?

Regards,

Ivy  

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: report with port & ficon number relationship

Hi Ivy,

You may want to try below commands: {X: is the FICON VSAN }


#show ficon vsan X portaddress brief

#show ficon vsan X portaddress {for detailed FICONport #s and descriptions}

I hope this answers your question.

Thanks,

Ozden

2 REPLIES
Cisco Employee

Re: report with port & ficon number relationship

Hi Ivy,

You may want to try below commands: {X: is the FICON VSAN }


#show ficon vsan X portaddress brief

#show ficon vsan X portaddress {for detailed FICONport #s and descriptions}

I hope this answers your question.

Thanks,

Ozden

New Member

Re: report with port & ficon number relationship

Hello,

Thank You for the help.

It gives me the desired report!

Ivy

295
Views
0
Helpful
2
Replies