SAN Port-Channel between Nexus 5000 and Brocade 5100
I have a Nexus 5000 running in NPV mode connected to a Brocade 5100 FC switch using two FC ports on a native FC module in the Nexus 5000. I would like to configure these two physical links as one logical link using a SAN Port-Channel/ISL-Trunk. An ISL trunking license is already installed on the Brocade 5100. The Nexus 5000 is running NX-OS 4.2(1), the Brocade 5100 Fabric OS 6.20. Does anybody know if this is a supported configuration? If so, how can this be configured on the Nexus 5000 and the Brocade 5100? Thank you in advance for any comments.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...