Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SANTap Configuration

Looking for docs on setting up SANTap on SAN OS 3.1.3a

3 REPLIES
Cisco Employee

Re: SANTap Configuration

This link is for 4.1 code....not sure how much has changed since 3.1

http://cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/santap/configuration/guide/SANTap.html

All I see for SSM in the 3.0 documentation is the Install and Upgrade Guide.

Here's the link on CCO to all the docs.

http://cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_list.html

Hope this helps,

Mike

New Member

Re: SANTap Configuration

Thanks for the info, though I already had those, which is why I asked about 3.1 specifically as there are SANTap limits which are unique by level of SSI. Thx anyway

Cisco Employee

Re: SANTap Configuration

The only thing I can locate specific to 3.x for SAN TAP config is a chapter in the 3.x configuration guide. There are some notes in the chapter that detail what the limits are in some version of 3.x code.

http://cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_3/cstap.html

-Mike

144
Views
0
Helpful
3
Replies