Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Script for adding zones on cisco9506

Hello,

I have some 50 zones to add to a zoneset.. is there any easy way like a script to use  and push it..

3 REPLIES
Silver

Script for adding zones on cisco9506

yes, script with your favorite scripting tool that will generate input file and then copy/past output into terminal window or uploaded directly into running config, ie: copy tftp://mytftpserver/script.txt running-config

@dynamoxxx

@dynamoxxx
New Member

Script for adding zones on cisco9506

Hello,

Please use this

Automatic Zone Set Distribution

To enable the switch to distribute the local zone set to all other switches in the VSAN when a zone set is activated, use the zone set distribute full vsan 804 command:

ca-9506# conf t

Enter configuration commands, one per line.  End with CNTL/Z.

ca-9506(config)# zoneset distribute full vsan 804

also refer

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_3/cookbook/CB_zone.html

Silver

Script for adding zones on cisco9506

what does zone distribution have to do with scripting zones ?

@dynamoxxx

@dynamoxxx
601
Views
0
Helpful
3
Replies