I am trying to implement smart zoning in a lab environment before considering it for our production environment.
Switch platform (for the time being) is MDS 9124. Running code for lab is 5.2(8b).
It seems that documentation on SZ is pretty parse besides the basic CLI config guides.
I am wondering what the recommendation is on zone population, IE, it was single init single target, but now should it be multi init single target (IE zone per SP Port), single init multi target (IE zone per host), or multi init multi target (IE zone per cluster).
Here is the example:
1x FC Array with 2 SP's. Each SP has a connection to each fabric...
4x ESXi hosts with a single connection to each fabric...
From what I have been reading (specifically this PDF:
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...