I have some doubt on storage replication link configuration. we have two dc in different location and need to replicate entire data over a L3 MPLS link and we are using EMC Storage with RPA at both side.
Old DC is having 6509 in core/distribution and new DC is having N7k in core/distribution and we are planning to terminate L3 MPLS link on this core at both side. RPA will be connected to Core Switches.
I did not configure this before dont have any idea whether will it work or not and how do we connect RPA at both side over L3 link. Or do we required router must.
If anyone have this experience, please help me to established this link.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...