Re: this configuration is currently locked for this VSAN ?
I don't think you need to suspend a VSAN to change the interop mode. You can issue this command to see if CFS (Cisco Fabric Services) has any application locked for that vsan 'show cfs lock'. If you see any application that has the swtich locked, you can issue the command 'xxx abort' while in configuration mode where xxx is the application that currently has the CFS lock.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...