Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

To Locate the storage through WWN on a host

I have multiple storages and VSAN's on the switch, I know 4 WWN's on a host, and believing they are zone with a storage, how do I locate the port of the storage and it's WWN, better using CLI?    

Thank you!             

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: To Locate the storage through WWN on a host

Lets assume the following:

server HBA 1: 10:00:00:00:0a:0b:0c:01

VSAN: 20

Issue the following command:

# show zoneset active vsan 20 | inc "zone name|10:00:00:00:0a:0b:0c:01" | inc 10:00:00:00:0a:0b:0c:01 p 1 | inc "zone name"

This would give you all the zones in effect which contain the server's HBA. With this zone list you can now list them individually to see the members which would include the storage ports.

2 REPLIES
Silver

To Locate the storage through WWN on a host

well you can list WWN logged-in to the switch using command "sh flogi database", but you know to know your array WWN to identify them.

@dynamoxxx

@dynamoxxx
New Member

Re: To Locate the storage through WWN on a host

Lets assume the following:

server HBA 1: 10:00:00:00:0a:0b:0c:01

VSAN: 20

Issue the following command:

# show zoneset active vsan 20 | inc "zone name|10:00:00:00:0a:0b:0c:01" | inc 10:00:00:00:0a:0b:0c:01 p 1 | inc "zone name"

This would give you all the zones in effect which contain the server's HBA. With this zone list you can now list them individually to see the members which would include the storage ports.

508
Views
0
Helpful
2
Replies
CreatePlease to create content