Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Troubleshoot connectivity with Cisco MDS 9124

Hello,

I recentrly discovered that it's become impossible to connect to a CISCO MDS 9124, neither with SSH nor with Serial connection.

What should i do please to resolve that issue please?

Regards!

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Troubleshoot connectivity with Cisco MDS 9124

Hi,

Are you able to access the 9124 by Device Manager, web browser, telnet, or ssh when your laptop is directly connected to the mgmt0 interface and your laptop configured on the same subnet as the mgmt0 interface?

What console settings, console cable, terminal emulator application are you using and does it work with another MDS9000?

Regards,

David

6 REPLIES
Silver

Troubleshoot connectivity with Cisco MDS 9124

what happens when you connect to the console ?

@dynamoxxx

@dynamoxxx
New Member

Troubleshoot connectivity with Cisco MDS 9124

when i connect to the console, nothing happens

when i try ssh, it says, disconnected

i should mention too, that pinging that fc switch is successful

thanks for your reply, and looking forward for your help

regards

Cisco Employee

Troubleshoot connectivity with Cisco MDS 9124

Do you know what version of code is the MDS 9124 running?

New Member

Troubleshoot connectivity with Cisco MDS 9124

hello,

i think that it's the default version, (3.1 ?)

i don't think that the previous administrator might upgrade or change it..

looking forward for your help

thanks in advance

Cisco Employee

Troubleshoot connectivity with Cisco MDS 9124

Hi,

Are you able to access the 9124 by Device Manager, web browser, telnet, or ssh when your laptop is directly connected to the mgmt0 interface and your laptop configured on the same subnet as the mgmt0 interface?

What console settings, console cable, terminal emulator application are you using and does it work with another MDS9000?

Regards,

David

New Member

Troubleshoot connectivity with Cisco MDS 9124

hello,

actually we just have one fc switch

for the information used to connect to the console:

>terminal : putty

>baud rate : 9600

>parity :  none

>stopbits : 1 bit

i mean the defaults, even the ssh, it does not give at least that warning about security certificate

regards

479
Views
0
Helpful
6
Replies
CreatePlease to create content