I have a DCNM installed along with the SMI-S agent service. I also have an MDS switch with a few FC ports that have VSAN trunking enabled. Does anyone happen to know if it's possible to obtain VSAN trunking information for an FC port via SMI-S? I've combed through Cisco's SMI-S agent development guides and SNIA's documents on SMI-S and could only find information regarding an FC port's port VSAN, but nothing on VSAN trunking for FC ports.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...