Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

unable to upgrade MDS9500 ??

hello

got strange error message trying to upgrade mds from 3.0.2A to 3.3.3

can somebody explain and help me to resolve this issue

thanks

JYP

install all kickstart bootflash:m9500-sf1ek9-kickstart-mz.3.3.3.bin system bootflash:m9500-sf1ek9-mz.3.3.3.bin

^[[ACompatibility check failed. Return code 0x40930041 (not enough space on standby supervisor disk).

2 REPLIES
Cisco Employee

Re: unable to upgrade MDS9500 ??

As part of the upgrade the 2 images are copied from the active supervisor, the one the box is currently operating on, to the backup supervisor. What this message is saying is that the standby supervisor does not have enough free storage to hold both images.

Issue this command to see what supervisor you are on.

show mod

Look for the module with the status of Standby.

Then issue this command to attach to it.

attach module x (x is the number of the module).

The prompt should show (standby) in it at this point.

Now you can issue this command to see the files on the bootflash:

dir bootflash:

Erase any old images with the command

del bootflash:

Once completed, issue the 'exit' command to return to the active supervisor, and attempt the upgrade again.

Hope this helps,

Mike

unable to upgrade MDS9500 ??

Thanks Mike... i am also facing the same problem... while upgrading MDS to latest firmware... but now i solved using your inputs... once again thanks a lot... this will help more.

876
Views
5
Helpful
2
Replies