Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrade MDS 9506 from 3.0(3c) to 3.2(2c)

After the updgrade, I received from the callhome 34 emails each 2 hours :

Severity Level:2

source:MDS9000

Switch Priority:4

Device Id:DS-C9506@C@FOX1031037L

Server Id:DS-C9506@C@FOX1031037L

Time of Event:2008-01-20T23:27:42

Message Name:RMON_ALERT

Message Type:RMON

System Name:MTLSANSW1

Contact Name:adminunix

Contact Email:adminunix@domtar.com

Contact Phone:+514-848-5096

Street Address:395 de Maisonneuve Blvd. West Event Description:WARNING(4):iso.3.6.1.2.1.2.2.1.16.16801792=8086132 >= (90, 0):10, 4 ThresholdType:RisingThreshold ThresholdValue:90

AlarmValue:8086132

start chassis information:

Affected Chassis:DS-C9506

Affected Chassis Serial Number:FOX1031037L Affected Chassis Hardware Version:2.0 Affected Chassis Software Version:3.2(2c) Affected Chassis Part No:73-8697-03 end chassis information:

Thanks for your help !

  • Storage Networking
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Upgrade MDS 9506 from 3.0(3c) to 3.2(2c)

Somehow or another, you are getting RMON events from the switch. I don't know why you are getting them as I believe they should be configured not set as default. Check out the following link:

http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a00806630f7.html

If you don't want them, turn them off.

1(iso).3.6.1.2.1.2.2.1.16 is ifOutOctets or the amount of traffic going out of an interface (even though I don't know what interface 16801792 could be). I would not be concerned about it. 8086132 octets is probably just 8 MB's per second or 64 Mbps which is a lot less that 2 Gpbs..

Cheers

Stephen

1 REPLY
New Member

Re: Upgrade MDS 9506 from 3.0(3c) to 3.2(2c)

Somehow or another, you are getting RMON events from the switch. I don't know why you are getting them as I believe they should be configured not set as default. Check out the following link:

http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a00806630f7.html

If you don't want them, turn them off.

1(iso).3.6.1.2.1.2.2.1.16 is ifOutOctets or the amount of traffic going out of an interface (even though I don't know what interface 16801792 could be). I would not be concerned about it. 8086132 octets is probably just 8 MB's per second or 64 Mbps which is a lot less that 2 Gpbs..

Cheers

Stephen

329
Views
0
Helpful
1
Replies