Cisco Support Community
Community Member

XRC Problem

Hi All,

We have two MDS 9222i switches at two sites located at different locations. we are running IBM XRC using the Two FCIP.

the two FCIP's are connected through MPLS links . we have also installed XRC accelerator license. we have following problems:-

when we are running the XRC with the XRC accelerator lic activated it does'nt pick the bandwidth of the link and xrc gets disconnected.

But when we are running it without it , it runs fine  and picks the bandwidth.

Please let me know at the earliest is there any Prerequestie for running XRC accellerator pack. we have the following licences installed

XRC_ACCL                      Yes   -   Unused never       -

IOA_9222i                     Yes   1   Unused never       -

IOA_SSN16                     No    0   Unused             -

DMM_184_PKG                   No    0   Unused             -

DMM_9222i_PKG                 No    0   Unused             -

FM_SERVER_PKG                 Yes   -   Unused never       -

MAINFRAME_PKG                 Yes   -   In use never       -

ENTERPRISE_PKG                Yes   -   In use never       -

CreatePlease to create content