Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CISCO AIR-AP1242AG-E-K9 HELP

Xmodem file system is available.
flashfs[0]: 9 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 3475968
flashfs[0]: Bytes available: 12523008
flashfs[0]: flashfs fsck took 26 seconds.
Base ethernet MAC Address: 00:19:55:73:67:bc
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 20 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/c1240-k9w7-tar.default
examining image...tftp://255.255.255.255/c1240-k9w7-tar.default: connection timed out
ERROR: Failed to open archive file tftp://255.255.255.255/c1240-k9w7-tar.default
Loading "flash:/c1240-rcvk9w8-mx.124-25e.JAP10/c1240-rcvk9w8-mx.124-25e.JAP10"...#####################################################################################################################################################################################################################################################################
File "flash:/c1240-rcvk9w8-mx.124-25e.JAP10/c1240-rcvk9w8-mx.124-25e.JAP10" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(25e)JAP10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 22-Aug-16 23:45 by prod_rel_team

Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
flashfs[1]: 8 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 3475968
flashfs[1]: Bytes available: 12264960
flashfs[1]: flashfs fsck took 3 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree tcomply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.

%Error opening flash:/c1240-rcvk9w8-mx/info (No such file or directory)cisco AIR-AP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
Processor board ID FCZ103880RC
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 8.0.110.7
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:19:55:73:67:BC
Part Number                          : 73-10256-05
PCA Assembly Number                  : 800-26918-04
PCA Revision Number                  : B0
PCB Serial Number                    : FOC10361LS0
Top Assembly Part Number             : 800-26965-03
Top Assembly Serial Number           : FCZ103880RC
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1242AG-E-K9
% Please define a domain-name first.
logging facility kern
        ^
% Invalid input detected at '^' marker.
logging trap emergencies
        ^
% Invalid input detected at '^' marker.
Press RETURN to get started!

*Mar  1 00:00:05.049: %LWAPP-4-CLIENTEVENTLOG: Unable to open event log file flash:/event.log
*Mar  1 00:00:05.050: %LWAPP-4-CLIENTEVENTLOG: Read and initialized AP event log (contains, 0 messages)
*Mar  1 00:00:05.051: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar  1 00:00:07.213: %LINK-6-UPDOWN: Interface FastEthernet0, changed state to up
*Mar  1 00:00:07.241: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(25e)JAP10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 22-Aug-16 23:45 by prod_rel_team
*Mar  1 00:00:07.338: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar  1 00:00:07.339: %CAPWAP-3-ERRORLOG: Failed to load configuration from flash. Resetting to default configlwapp_crypto_init: MIC Present and Parsed Successfully
*Mar  1 00:00:07.900: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar  1 00:00:08.213: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar  1 00:00:16.741: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.248, mask 255.255.255.0, hostname AP0019.5573.67bc
Translating "CISCO-CAPWAP-CONTROLLER.ASUS"...domain server (192.168.1.1)
Translating "CISCO-LWAPP-CONTROLLER.ASUS"...domain server (192.168.1.1)
*Mar  1 00:00:37.107: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:00:37.133: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.ASUS
*Mar  1 00:00:37.147: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER.ASUS
Not in Bound state.
*Mar  1 00:01:32.655: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar  1 00:01:35.673: %CAPWAP-3-ERRORLOG: Invalid event 38 & s
*Mar  1 00:01:35.782: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.248, mask 255.255.255.0, hostname AP0019.5573.67bc
Translating "CISCO-CAPWAP-CONTROLLER.ASUS"...domain server (192.168.1.1)
Translating "CISCO-LWAPP-CONTROLLER.ASUS"...domain server (192.168.1.1)
*Mar  1 00:01:43.656: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:01:43.692: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.ASUS
*Mar  1 00:01:43.714: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER.ASUS
  • Support Community Help
Everyone's tags (1)
26
Views
0
Helpful
0
Replies
This widget could not be displayed.