Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

List of documents from Cisco Support Wiki that are NOT in Cisco Support Community

This article contains the list of documents on the former Cisco Support Wiki that can be found on Cisco.com. (Excel file attached)

If you have a bookmark from the former Cisco Support Wiki at http://supportwiki.cisco.com, this list will help you to identify the content that was not added to the Cisco Support Community (https://supportforums.cisco.com) because it is available on Cisco.com.

If the document you were trying to find can't be located using search in Cisco Support Community, please refer to the attached list. If it is neither in this list nor in this website then in such cases we recommend you to use Cisco.com search http://tools.cisco.com/search

Note: There were many articles on the Cisco Support Wiki that were not moved and they don't exist even in Cisco.com. Those articles were classified as not providing unique value.

If you still have questions, please send us feedback. The feedback link is located on the top right corner.

Version history
Revision #:
1 of 1
Last update:
‎09-16-2009 04:31 PM
Updated by:
 
Labels (1)
Comments
New Member

Dear Sir,

I need help related configuration PPTP port 1723 forwarding from ASA 8.4 to another FW andi alredy do the below config.

object service PPTP

service tcp source eq 1723

nat (inside, outside) 1 source static PPTP interface service PPTP PPTP

but ereor

nat (inside,outside) static interface service tcp 3389 3389

FW-TM-01(config)# nat (inside,outside) source static OBJ-1723 interface servic$

ERROR: empty object/object-group(s) detected. NAT Policy is not downloaded

FW-TM-01(config)# packet-tracer input outside tcp 172.23.254.6 1723 82.147.203$

Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   82.147.203.198  255.255.255.255 identity

Phase: 2
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:

Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: NP Identity Ifc
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
             
FW-TM-01(config)#
FW-TM-01(config)#

nat (inside,outside) static interface service tcp 3389 3389
FW-TM-01(config)# nat (inside,outside) source static OBJ-1723 interface servic$
ERROR: empty object/object-group(s) detected. NAT Policy is not downloaded

please help me what is the correct config.

i also used the following command for test.

FW-TM-01(config)# packet-tracer input outside tcp 172.23.x.x  1723 82.147.203$

Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   82.147.x.x  255.255.255.255 identity

Phase: 2
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:

Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: NP Identity Ifc
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
             
FW-TM-01(config)#
FW-TM-01(config)#

New Member

thanks very much