Switches - Small Business

Quick overview of my setup:4 Buildings all interconnected by Fiber in 1 LAN.  4 Vlans - Data (Default Vlan), Voice 1, Voice 2, and Guest.  The vendor doing phones reccomended 2 Voice Gateways for their installation thus requiring 2 seperate Voice Vla...

do the sg200-50 switches support:dhcp snoopingdynamic arp inspection ?? thanks

Hello,i want to disable the ICMP redirect messages, but i can't find the command "(no) ip redirects". Are there other commands ?

I am new to Vlan's so bear with me.  I have a Windows 2003 server 192.168.1.3 that does our DHCP - 192.168.0.1 - 192.168.3.254 Subnet 255.255.255.252.   I added a scope of 10.10.0.1 - 10.10.3.254 Subnet 255.255.252.0.  I have a UNIFI wireless network...

Hi all,Could anyone explain me what does it mean the last two characters of the Small Business Part Numbers?For example:SF500-24-K9-NASF500-24-K9-G5SF500-24-K9-AUSF500-24-K9-KRThank you  

Hi, I have problem with SG500, I have always problems, a slow network and traffic losses.here the log2147481317        2013-May-03 12:24:04   Error      %AUTOSMARTPORT-E-FAILEDMACRO: Macro ip_phone_desktop for auto smart port type IP_phone_desktop on...

New to the forum and relatively new to networking. Looking for some guidance on an ASA5505-50-BUN-K9 and Cisco SF300-24P (SRW224G4P-K9-NA) in regards to independent wireless networks and network isolation when linked to a time warner cable model with...

Hi, My SG300-10P cannot bootup suddenly, LED status shows at attached photo.System LED keeps blinking, G9 LINK/ACT & GIGABIT, G10 LINK/ACT keeps on even no connection.DB9 console port no respond.anyone knows whats happened? Is it borken? ThanksAlan

I have a problem with the mirroring of port on my SG200-08 that I just purchased.  The firmware is 1.0.6.2.I mirror the port g1, to which my router to the Internet is connected, to the port g2 to be able to see the traffic with a Centos system runnin...

do the sg200-50 switches support:dhcp snoopingdynamic arp inspection ?? thanks

Hi!We considered using the SF100D-05 Switches in small offices with an insufficient amount of network jacks. However, it appears that this switch-series is faulty. In the combination of new MSI-mainboards with Realtek network chipset, the link to the...

HI!I have a small network. I have 3 300-28 cisco switches. I already connected my 3 servers  and clients with the switch 1 and now I want to add more clients and I need to add my other two switches in the network. Please guide me with the simple conf...

Is there a way to upload a config file to a SF302?