Switches - Small Business

Can inter VLAN routing be done on SRW (Cisco 300 series) switches ?

Question regards PoE on older devicesPoE works fine with C 1131/1141 Access Points and C-7975 IP phonebut PoE does not seem to work on 7960 Phones nor on the C-1121 Access pointsAll devices work properly with the Cisco power injectors or on a Cisco C...

Hello,I can't make sometimes an ACL binding to a port of the SG300-10See attach fileCan someone tell me why?

Hello,Where I can find more information about ACL concerning the SG 300. I have read somearticles about cisco acl. Maybe there are examples or ..... The manual is very short about itthnx

Are the MFELX1 mini-gbic officially supported on the SR2024T switch? The datasheet http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps10863/datasheet_C78-582017.html cites only the MGBLH1, MGBSX1, MGBT1, MGBBX1, MGBLX1 so it seems i...

Hello Community,I have what I think is a simple question. My ISP is providing me with 1 public IP on a /30 network and 14 public IPs on a /28 network.In this example the 10.0.0.1 is the default gw provided by my ISP and 10.0.0.2 is my SF300-08. If I ...

I'm using anSG300-28P as our VLAN interconnect between our ISP and Firewalls as well as remtoe Offices.So there are several VLANs that we have on the unit:101     10.1.x.x Internal Subnet102     10.2.x.x Internal Subnet10#     10.#.x.x Internal Subne...

I have two PC22224 managed Cisco/Linksys  switches with the same problem.  I cannot get to a login when using the terminal console connection.  When they boot, they pass all tests until  almost ready to run, then I get this message via the console co...

I've problem with two Cisco SGE2000.First one in Layer 3 with vlan database and one 1/11 Trunk port tagged vlan 10,20,30  and untagged vlan 1 and the second in Layer 2 with no vlan database 1/11 one trunk port untagged vlan 1. The vlan database is no...

Hi,we have two Catalyst Express 500 switches and a ESW 520 just purchased. the VLAN on the other two is 2. how do I change the Default to be 2 instead of 100 in the ESW Switch.

Hi,I am trying to configure MSTP on Layer-2 network at work. We have multiple switches connected on Wireless point-to-point links with redundent links.MSTP is configured with multiple regions. All the servers are located in RegionA and other regions ...

I have a SGE2000 switch (standalone, non-stacking) and i'm running out of outputs. I have a number of workstations in the office that don't necessarily require all the features of a managed switch so I want to put them on a SG100-24 that I can use as...