Switches - Small Business

Hi. I am looking for benchmarks or information about forwarding capacity vs number of acl’s for ESW 540. Any information will be helpful. Thanks.

Hi everybody,i need to know the values of the memory of the following switchesCisco SRW224G4Cisco SLM224G4SCisco SFE2000Thanks,Miguel

I have an SR520 router connected to a CE520 switch. That switch is then daisy chained to a second CE520 switch via the Gig ports. All works great. I now need more connections than we have wiring for at one persons' desk. So I put a small 4-port Links...

Dear Community,as mentioned above in the subject field, we are evaluating Linksys for Business products.We are using Cisco products (i.e. Cisco WS-C3750G-12S-S) for core networking, due to new investment planning, we are evaluation how to upgrade our...

I have a customer with the above mentioned unit that suddenly totally stopped working.  Brought it back to the shop to try and reset the password and upload latest firmware.  Have hooked up to the console serial port.  The console problem alternates ...

can someone tell us if the SRW2024 affected by this :http://www.cisco.com/warp/public/707/cisco-sa-20090908-tcp24.shtmlregardstom

Dear All,I've question regarding, MGBLH1 SFP modules, in the Cisco documentation https://www.cisco.com/en/US/docs/interfaces_modules/csbna/mgb/quick_start/guide/MGBLH1_MGBSX1_MGBT1_UG.pdfwe can find that it works with MMF cabling, please check the MG...

Hi,we have a single SRW224P that is used for both Linksys phones and PC's. After a couple of weeks of uptime and normal operation we notice, that newly connected equipment (mostly laptops that people take home) doesn't get IPs from the DHCP server.We...

HiWith SRW224G4P Switch, to be able to restrict management access to it to only LAN and 1 Public IP address range??I have done the attached image. however it is still accesible via any other Public IP address..any ideas?

Hi, we have a problem with one of our SGE2000 switches, we use serveral ones in diverent parts of the office, but one is causing a great problem. It is running for some time (days) then suddenly, all ports beginn to blink (even unused) and all networ...

Hey i have this issu with a Cisco AP1131 it keeps saying:Due to insufficient inline power. Upgrade inline power source or install power injector.I have 4 Accesspoint on the switch and thats all.