Switches - Small Business

We recently purchased and installed the SLM2024 managed switch, however are having difficulty finding out where to configure prioritizing for voice traffic.  We have an internal VOIP phone system and want that traffic to have priority over data traff...

I choose to buy a SRW224G4P with this documentation:http://www.cisco.com/en/US/docs/switches/lan/csbms/srw248g4p/administration/guide/SRW224G4P-248G4P_User_Guide.pdfOn this documentation, the switch is able to use IGMP v3 and IGMP querier:p99:  IGMP ...

Dear Support Team,One of our partners encountered problems with multicasts running on SPS series switches(they’ve checked it on 3 different models, mentioned in subject). Partner wants to use SPS series switches with IPTV, unfortunately they observe ...

Would like to know what the power per port is as we are running into situation were we are powering Mircrotik Crossroads AP .We require the SRWxxx to power 12 of these AP units and on inspection we see that we can only power 8 of them at a time . The...

Is it really dangerous to disconnect the internal fan ?The noise level is very too high for a personnal home use.

It will power my Avaya IP phones just fine.

Description of the problem:Switch model Name: SRW2048Hardware Version: 00.03.00Boot Version: 1.0.0.04Firmware Version:   1.2.1Some computers in the LAN network has normaly download, but very slow upload to the Internet. Also the connectivity during c...

My partner has the following questionI’m looking for information on the SPS2024 switch, I see the Data Sheet, however I can not find it at distribution, or on the global price list. What’s the deal?Can someone help?

Hello,just installed a SRW 2008 MP instead of an unmanaged 10/100 Mbit D-Link Switch. Now the VOIP doesn't work anymore. If I place a call, it rings at the other side but when picked up no voice can be heard. The Web interface to set the switch up on...

I have a small business network connected as follows:RVS4000 - LAN IP 192.168.10.1- Connected to SGE 2000 Port 12 IP: 192.168.10.2SGE 2000Port 1 - 192.168.100.1|-> Connected to small hub with 5 computers 192.168.100.xPort 2 - 192.168.11.1|-> Connecte...

Hello Everyone,Recently purchased some 1000Base-T Mini-GBIC SFPs (MGBT1) under the impression that they were full-fledged Cisco devices with intent to use them in our 3560G-48TS. As I hotplug them in, I receive the following:%GBIC_SECURITY_CRYPT-4-VN...