Cisco SG500-28MPP 28-Port Gigabit PoE switch firmware update from 1.3.5.58 to 1.4.1.03

[sameer-parvaiz]

Hi Team,

I am new to Cisco SG 500 Series switches, I have one Cisco SG500-28MPP 28-Port Gigabit PoE switch and I want to use it for layer3 routing with RIP protocol. I have converted the mode from switch to router but when I am trying to configure the RIP I am not getting RIP mode, I have checked with tac and they said that I have to update the firmware.

the current Firmware version is 1.3.5.58 and boot version is 1.3.5.58. I want to know the steps to update to the latest firmware which is 10.4.1.03.

My confusion is which file I have to upload the first firmware or boot version file.

I have downloaded the following files from the Cisco Website 

sx500_boot_1.3.7.01.rfb

sx500_fw_1.3.7.18.ros

sx500_boot-14002.rfb

sx500_fw-14088.ros

sx500_boot-14002.rfb

sx500_fw-1413.ros

Thanks in advance

Regards

Sameer

[ajpareek]

Hi,

Please find the below URL to download the latest firmware version of SG500 device :

https://www.cisco.com/c/en/us/support/switches/sg500-52-52-port-gigabit-stackable-managed-switch/model.html#~tab-downloads

Also please find the below URL to find the steps to upgrade the firmware in SG500 device :

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb5007-firmware-upgrade-troubleshooting-on-300-and-500-series-manag.html

Regards,

Ajay Pareek