I have done this a million times and something just isn't clicking today for some reason...
Switch: SG500
VLANS: 1 (default) xxx.xxx.0.0/24 network, 150 (device management vlan) xxx.xxx.150.0/24 network
I am plugged into port 1. This is a trunk port with VLANs assigned as follows:
- VLAN 1 (Default) - Untagged
- VLAN 150 (dev mgmt) - Tagged
Device is plugged into port 2. This is an access port with the following VLAN assigned:
- VLAN 150 - Untagged
Why is it I cannot communicate with the device on port 2?