Switching

Sep 20 11:32:29: %QOS-6-POLICY_INST_FAILED: Service policy installation failed   I am trying to put a policy-map on a interface and is not getting applied. I am getting the above message.   3850 / Version 03.06.08.E / IPBASE     policy-map ANAS Poli...

Hi guys,   Please some one check below crashes info and give me a solution. Current IOS is  15.0(2)SE5 This crash was happened during upgrading to Version 12.2(55)SE10 same as upgrading to Version 12.2(55)SE12     *Mar 1 00:00:31.356: %LINEPROTO-5-UP...

Hello,   I'am using now a switch with the version WS-C2960+24PC-L ,   I'm trying to update all switchs from 15.0(2)SE5 or 15.0(2)SE8  to  the suggested 15.2(2)E7 ,   Once the ios is uploaded in the flash: and after changing the boo system path the sw...

Hi   Can we test OTV feature on single N7K Switch.I want to create 4 VDC .Two VDC will act as L2 switch and  TWO VDC will configure the OTV feature   Looking for help and suggestion  

Hi folks,   I have here two ISR4331.   One seems to be originally ordered as Cisco ONE item with "FoundationSuiteK9", the other as a normal device with  "Technology Package Licenses".Cisco ONE----------------------------------------------------------...

Hi,   I've bought 2 cisco catalyst c9300 switch it came with Fuji Version 16.8.1a software , so I'm not sure if I need to remove this and install Everest software.   Thanks Anton 

Hi  I'm troubleshooting a problem with a host connected to my Nexus 56128. I would like to do a packet capture of the data going to that host. Is there an easy way to grap a .pcap file of this data from the switch?    thanks  Dan 

When i see output of show power inline there is no module is available. Actually we are facing issue of Ip phones are not working with PoE we arranged external power adapter to run these temperately. Need your view on this output what is happening   ...

Why do I get various ping result from an adjacent router (1-48 ms)? is this normal? these 2 router is directly connected with optical cable on Gigabit port with utilization below 30%   !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...

Hi Dear Friend    İ need some explain about VACL i sharing simple scenario i am clearly understand that i creat vlan and standart access-list after we are creating vlan-access -map and match ip address access list number ok  action forward  i underst...

I'm running Fuji iosxe 16.9.1 on my two 9407R switches that I want to cable together as a StackWise Virtual (SWV) switch.  In reading the 16.9.1 config guides and release notes i've come to the realization that I really don't want to use dual-SUPs in...