would like to pass traffic to ASA first before inter vlan routing at 2901 router because I would like to control vlan 2 can access vlan 3 but
not allow vlan 3 to access vlan 2
2960 vlan 2 switch 1 ---> 2960 switch 0 ---> ASA ---> 2901 router 0 --> 2...
Hi !
I'm trying to authenticate from Solwarwinds application to our Nexus 5596 switch. I'm always getting the following error message :
2017 Jun 2 14:35:35 SWITCH_HOSTNAME %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed from Solarwinds_IP -...
As part of my learning curve after inheriting our network, I am trying to get an experiment with an ASA 5505, a switch and multiple vlans working.
I have an ASA 5505.
Interface 0/1 has been given IP address 192.168.0.1. The ASA automatically created ...
I have an existing 3650 with IP Base license. It's configured with EIGRP. I need to add a 2nd switch and make it a stack. Does the 2nd switch need to have IP Base license also, or will a LAN Base unit suffice? Will the 2nd switch inherit the mast...
Hi, I am working on a customer quote required 100+ Catalyst 2960 switches and 30+ ISR Routers and Prime Infrastructure to monitor them. I am actually confused about the license tokens of PI required for the devices.
I have used C1-CISCO4321/K9 for th...
hi every1, plz some 1 solve this problemsuppose i have 10 contigiuous networks connected on my routers loopback interfaces10.1.0.1/1610.2.0.1/1610.3.0.1/1610.4.0.1/1610.5.0.1/1610.6.0.1/1610.7.0.1/1610.8.0.1/1610.9.0.1/1610.10.0.1/16now i want to adv...
Hello all,
We have two networks which is connected to each other by leased line, one network is our data center and other is our Branch location. we have configured multicasting in dense mode on both the end over all the interfaces. we are able to pi...
Hello,
In VSS documentation, we can see that there are few events affecting the "catalyst 6500 CPU" (Sup2T MSFC CPU) that could cause the loss (or the flapping) of the VSL link:
"
• High CPU utilization can trigger a VSLP hello hold-timer timeout, wh...
Hi
My network is a star topology and has 3 multilayer switches, model 3650, interconnected to each other with each of them has their own Layer 2 switches connected. At first, I've set up trunking on all of the them, both Layer 2 and Layer 3 switches...
Hi
If my Nexus switches, says is missing this:
ENHANCED_LAYER2_PKG No - In use Grace 83D 3H
This is the license to buy right?
L-N5548-EL2-SAK9=
(My Nexus switches is Nexus55489Up).
Regards Kenneth Dalbjerg
I'm doing a lot of reading about the ASA 5505 (which I have inherited the management of).
Would anyone mind helping me understand an entry in the documentation?
I'm reading about how in routed mode all vlans have the same MAC address by default. Th...
Hi friend
We are using 2 Cisco 2960 48 port switch.we have change the console and telnet password in the switch. But through web brower we can able access our switch but typing switch ip address and default user name and password ie cisco and cisco.h...
i have a ws-c4500x-16 switch at a customer that is giving this log message:
THRESHOLD_VIOLATION: Te1/1/3: Rx power low warning; Operating value: -21.0 dBm, Threshold value: -19.0 dBm.
please what does it mean? and how do i fix it?
Hi
i am using solarwind tftp server for upload image on Cisco device, but i am not able to upload it because of following error binary,GET.Transmission failed. could not find file
1- I have disabled the window firewall
2- root directory is right...
