Hi, I have this command configured on a Cisco 6506-E: boot system flash sup-bootdisk: The IOS image is on the sup-bootdisk. 6500#dir sup-bootdisk:Directory of sup-bootdisk:/ 1 -rw- 74689508 Jan 4 2009 01:26:48 +01:00 s72033-ipservicesk9_wan-mz.12...
Hi, I have this command configured on a Cisco 6506-E: boot system flash sup-bootdisk: The IOS image is on the sup-bootdisk. 6500#dir sup-bootdisk:Directory of sup-bootdisk:/ 1 -rw- 74689508 Jan 4 2009 01:26:48 +01:00 s72033-ipservicesk9_wan-mz.12...
Looking for Equivalent Cisco Switches Below: 1) Brocade VDX 6740T 2) ICX 7750-48F3) ICX 7450-48P
Hello everyone. I wanted to know if anyone can give me a hand to make the two megabytes that come to me by the wan are distributed two Lan. Lan1 ---- 512kb Lan2 ---- 1500kb If I could ensure that minimum for each lan, it would be great. (I'm not s...
Hello Guys. could anyone help me, I cannot have telnet access to my router from outside our company. Current configuration : 4782 bytes!! Last configuration change at 09:30:57 GMT Thu Jun 30 2016 by altec!version 15.4service timestamps debug datetim...
OSPF – the switch on which I am to form neighbours within an area , that area is configured as a NSSA - area 10.94.0.0 nssa default-information-originate no-summary I have been given 4 subnets , I will advertise, all of which are /24...
I have a 3560 switch and have multiple vlans on it. I need to prioritize traffic for vlan 20. How do I go about doing that? It is for AV equipments. I don't have any DSCP values but I am assuming its 46.
I upgraded the firmware on a few switches this past weekend: On my 3750X core stack I went from 15.0(1) SE2 to 15.0(2) SE9 On my 2960S access switch I went from 12.2(55) SE5 to 15.0(2a) SE9 Since the upgrade I've had 2 devices that are continually ...
Hello, so I have a 6880 VSS pair with some 6800IAs hanging off the VSS as FEXes. Even though I have the "no logging event link-status" command on the access ports of the IA, I am still getting up/down log messages in my logs. Any ideas why? I also...
We've got an Ethernet router (2911) that's taking errors on Gi0/0, which is connected to an encryptor. The errors are dot3StatsInternalMacReceiveErrors The description I'm finding by Googling isn't helping a whole lot... "A count of frames for whic...
Can you have multiple OSPF processes in a single VRF?
Hello, I am looking to find out which series of switches supports VLAN mapping (or translation depending on who you ask). I attempted a search online and on Cisco's site but have had little luck. Are there any good resources online for finding thi...
Hi, I have a catalyst 2960-Series switch sitting on the rack and has been unmanaged for about 3 years. Now i wanna take the first step to get into the switch and see whats in there. - No console cable available. -This switch connects to about 4 dif...
We seem to have an issue with HP laptops and desktops connected to Cisco WS-C3560CG-8PC-S. First DHCP Discover frame is lost 90% times ( sometimes it works ). I am also testing with PXE boot ( BIOS ), so even before the operating system starts. The ...
Hi We're having issues with SF300-48PP switch, it hangs and becomes not accessible from network, and during this "hang" the system LED blinks amber, after restart switch is accessible for some time and logs show %Environment-A-FAN-STAT-CHNG: FAN#4 st...
Hello. I am new to cisco, and have recently bought an AS2511-RJ console unit, and two 2950 switches and a 3550 switch. Also bought two 2621xm routers and a 2651xm. I have cables up all the equipment with console cables and can console to each device...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-24-2024 02:27 PM | ||
04-23-2024 02:53 AM | ||
04-19-2024 05:58 AM | ||
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM |
User | Count |
---|---|
11 | |
11 | |
10 | |
9 | |
6 |