Switching

So I need to forward TCP 80 to a 10. IP.on one of our switches. I see this switch has one ACL in it. ACL 199. Do I set up the port on that ACL or do I need to set up a outside ACL just for that port and IP?And do I have to set it up in any other swit...

Hello Deari have configured 2 different area using OSPFboth area are configured as area 0first the two areas where not connected together.but the next step now is to connect the two areas together using static route. ( 2 routers in the first area sho...

I have two sites that each have a router and switching.  I am going to connect these two sites through a fiber connection.  The one subnet is 10.110.46.0/24 and the other site is 10.110.145.0/24. Each router has a MPLS connection back to the corporat...

Dear Sir, Please we are trying to create a small CCIE lab(RnS) in our DEMO center. We are looking on getting like  3 units of routers and  3 units of layer 3 switches. I hope this qty will be enough? Can you help me come up and generate a BoM for thi...

Hi...I am finding it very difficult to understand the terms backplane and switch fabric.Are they same or different.And how to find the backplane speed etc Kindly explain.Regards.

Hi.We purchased used switch Catalyst WS-C3750E-24TD. Output (show version) from it is the end of this letter.And we found that it writes to the console:ILET-1-AUTHENTICATION_FAIL: This Switch may not have been manufactured by Cisco or with Cisco's au...

Is it right that i cannot take a look into bug CSCug61691? 

Hi, Two(2) WS-C2960X-48LPS-L in stack only enable ports on one switch.

Hello all,I'm completely stumped at this point.  I have a printer on our VLAN 134 that refuses to ARP when connected to one of our 4510E switches.  The switch port configuration is the same as any other port: interface GigabitEthernet3/32 switchport ...

I have a 2960 poe switch connecting a number of voip phones and an Egdemark voip router on access ports on a dedicated voice vlan.  It also connects several trunked access points.  The 2960 is trunked to an upstream 3560 that provides ip routing for ...

A 6' Cisco SFP Cable is $180 while amazon sells a 6' StarTech.com SFP cable for $80. Besides price, is there any difference between the two cables in terms of reliability and connection? Anyone have experience with StarTech.com cables? Thanks in adva...

Hi, all!I have a question about Cisco Nexus 5K.I need to connect 9 2960S access switches to distribution switch.Also, i need to connect one remote SAN storage to two servers via FC.I want to use nexus 5K with universal ports.But Nexus is a datacenter...