Switching

Hello,Can someone explain to me why we use access lists in a mpls cloud that uses IBGP. I thought for the most part  access lists were used on firewalls not routers running BGP. Do we even need access lists with bgp can't bgp work without access list...

i cann't understand the meaning of small businees switches for example , there is a Tender requiring Switch 24 port & 56 Gbps Throughput i found that comapnies offered Cisco 2960X  ,    not sure what not to use   " SG300-28 "  , This will give  there...

Hi,I have a device which work on PoE (IEEE802.3af). Is it possible to sent the data + power to the PoE device by use of Cisco PoE+ (IEEE802.3at) i.e Could PoE+ Switches (IEEE802.3at) support the PoE Devices (IEEE802.3af).Please help.ThanksAmey

Hi,I have a device which is a PoE device (IEEE802.3af). Can Cisco 3850 PoE+ (IEEE802.3at) support both data and power to Normal PoE (IEEE802.3af) devices.Please confirm.ThanksAmey

                   We have several switches that are connected to our Nexus 7k.  Most switches that are trunked and are getting CRC errors on the access switch uplink ports.  All switches that are connected via an access ports, have no crc errors.  A...

WS-X6816-10G-2T  works only with   super visor engine VS-S2T-10G ?WS-X6816-10G-2TXL works only with super visor engine   VS-S2T-10G-XL ?is this right  ?  or Super visor Engine VS-S2T-10G-XL  can support both  WS-X6816-10G-2T  & WS-X6816-10G-2TXL ?htt...

We have two L3 3560's.  One 3560 has an upstream MPLS router.  The other 3560 has an upstream backup VPN router.  Both of these 3560's are L3 switches with IP routing enabled.  I created a PBR on both so that specific traffic routes through the MPLS ...

Dearsplease help me , During I upgraded my Cisco Switch 3750x , during booting this issue was occured , the booting dont be finish, please help for solving-Frame 09: SP = 0x055D7270    PC = 0x00688C68Frame 10: SP = 0x055D7378    PC = 0x00688EA0Frame ...

Hi Team, We have Cisco ME-C6524GS-8S switch.We are facing issue with this switch.As we are suspecting issue with IOS.Can you please to resolve this?.I want to know "is the below IOS suitable for the below processor?".Because every day the device is ...

Hello,I have a problem i need help with, i got i cisco 2600 series router recently which is used,when i first started it ,the console screen goes only to ROMMON and can't boot from the IOS image, this is what iam getting : and i also wanna make sure ...

Hello Experts,Please have a look at my diagram I've mentioned all required information- We are using Microsoft TMG Firewall as a web proxy for our internal clients. Its has 2 NIC External connected to ASA and Internal connected to Switch.- We are goi...

Hi,I am planning for Network auditDevice: 7200 Router, 3845 routerSwitch: 2960,3750,4500,4900MASAI am mainly doing the audit on this perspective: Vulnerablities PerfomanceBittleneckPls share some docuemnt/ppt/guidelinesBr/Subhojit

I have a remote site on a 2811 IOS 12.4(15).  Interface FA 0/0 faces the ISP and is set for DHCP.  What command can I run to see all of the information given out with the IP lease from the ISP?  I need to find out what the IP address of the DNS serve...