Switching

Hi experts,•1)      I have configured 4 VLANS on my L3 switch.•2)       I have one router which has connected 2 ISP link•3)      L3 switch & router has connected each other through L3 link.(which has different subnet)•4)      VLANS on L3 switch ( vla...

Hi,Could someone please explain to me how the following regular expressions work?^123_.*_45$ = This looks to me as though it would match an AS starting with 123 and ending in 45 with only 1 AS in between them.^123_.*45 = What does this match? the boo...

                   1)Can any one brief me about difference between CAM & tcam?                        2)Back plane speed of 4507 R ,4507E , 6509,6509EI had gone through lot of doccuments but ther are confusing.Thanks

Currently this is our network setup                          Sw1 Sw2 Sw3                               | | |                                 Sw1 10.60.0.4; Sw2- 172.16.1.4; Sw3 192.168.128.4                               | | | 10.60.0.1------------...

HiIs it possible to use 1GB (SFP / Copper) on the built-in 8 x X2-10GB ports without any Network Module of 1/10GB. If so how.-Avshesh Chopra

This past networkers I was at the Cisco booth discussing how the 2248 can connect to the 5548 and have server connectivity.  It was told to me that now, as of a fairly recent NX-OS release, you can have the 2248 going dual-homed to both 5548 via VPC ...

Hello all,Cisco documentation states that:The Cisco Nexus 5596UP switch has three slots that can be used for the following optional expansion modules: •16-port Universal (Fibre Channel and Ethernet) GEM (N55-M16UP) that provides 8-, 4-, 2-, or 1-Gbp...

I'm hoping somebody can point me in the right direction for a problem I'm experiencing... I have attached a basic diagram to hopefully make sense of my explanation of the problem.I have 3 3560 switches which are configured with trunks between them. T...

Pls provide the supported supengine models in cisco 4507RegrdsRanjt

Hi,Not sure if this could be discussed here, but I'll try Iam trying to configure a solution based on SMB products on ccw, using the configuration tool, or opening an oip as well. For some reason products such as sd208p are not showing up in any way...