Hey Folks,anybody knows how to deregister a Switch from CSSM doing SLUP?Got one registered into the wrong Virtual Account..Doing Smart Licensing I would just do "license smart deregister" and again "license smart register idtoken <new token>" ..But w...
Forum Posts
We need to connect two labs via fiber that have sx550x-24f-k9 managed switches, and I wanted to verify that the following would work to convert the fiber to Ethernet (the distance is less than 1km). If this isn't the best option, what are recommenda...
Resolved! Cisco 3650-48PS Switch Stacking Priority
Hello,I currently have 3 cisco 3650 switches stacked and configured. I want to prioritize the switches (all currently at 1 for value) in the same role they are currently in. Below is what I'm trying to accomplish but what I'm wondering will this mess...
Good day!I have a new WS-C2960L (Version 15.2(7)E2). I tried all possibilities with cisco, admin and blank. Not working.Any ideas?Thanks
Hi All, I have a 3750 that has a few different DHCP pools setup on it, 1 of the pools is for a guest wireless vlan that seems to be giving us issues. Wifi is running on Meraki APs, the APs are configured as trunk with all vlans allowed. Our interna...
Hello, i have a new 3850 Switch and i configured ip ssh ver 2 and all ssh commands but when i access the switch using ssh i got "No matching ciphers found. Client (x.x.x.x) supported ciphers : aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,rijndael-cbc...
I have a 3560 switch and many access points plus cisco 3900 router but I don`t have any firewall. I want to apply mac filtering in my network.I tried MAC-ACL but it can`t be apply to out bound of switch interface. and only allow me to apply it to ing...
I've got 2 ASA and 2 Core Switch stacked. How can I config Port-channel from ASA to Core Switch and assign IP to Port-Channel of ASA, Coreswitch. Look like gateway will be .1 in core and .2 in ASA. From ASA1, I already used 4 ports from g1/1 - g1/4 f...
I have this very weird problem where my C1111-8P router sees all clients as having the same client-id. i.e. I connect a number of devices one at a time and they all appear as having the same client-id.When I connect multiple devices at the same time ...
I'm trying to finish this lab but for some reason my DHCP is failing; After 4 hours of working through something meant to be easy I've decided to create a post regarding this issue.I'm not looking for someone to complete it for me but rather I'd like...
Resolved! Cannot Ping SVI from hosts in vlans
Hello community,I have created a lab in packet tracer for practice and i face an issue.I have attached a picture that shows the lab i have created.I have created a SVI called vlan 23 on SW3. The vlan 23 is up/up, but it is unreachable.I have uploaded...
HelloI have three switches WS-C3750X-48 stacks.I want upgrade ioS from 15.2(1)E1 to 15.2.4E10 by command "archive download-sw", but I haven't enough space on flash.Could somebody tell me what I can delete from flash1,2,3?Screen attached. Thanks you i...
Hello! I am configuring a switch in my homelab that is connected to a Proxmox server. I have made a VLAN for the server (Vlan 200) and I have made an SVI for it with the IP address 10.137.20.1 255.255.255.0. The IP address associated with the proxmox...
I have set 3 VLAN on L3 switch (by following switch virtual interface method).VLAN 10 IT, Contains storage, pfsense & AD(domain controller)VLAN 20 ACC, contains desktops clientsVLAN 30 HR, contains desktops clientsGateway for every nodes is set to re...
Resolved! mini USB console Windows 10
Hi did anybody get this to work? i am using Win10 64bit installed the 64bit driver from cco which is kind of old - back from 2014 Cisco_usbconsole_driver_3_1.zip install and restart i see the USB Serial Port COM 4 in device manager changed in put...
