Either is it necessary is to have same domain name,same password,same version, for replicate vlan database from server mode to client mode? Or we have some other option to do this?Sent from Cisco Technical Support iPhone App
Hi al there,my task is to upgrade a couple of 6500 series switches, 6513 with SUP720/MSFC3 (WS-SUP720) and Policy Feature Card 3 (WS-F6K-PFC3B) installed. Could someone give me an "easy-to-understand" howto, how to upgrade those switches if in SSO re...
I'm trying to get a small branch office up and running. It has a newly installed T1 Line and a cisco 1841 router. The network is mixed topology with linux, mac and windows, no servers to speak of. We want to run dhcp and nat from the 1841 and seem to...
Hi, QoS expertI tried to put QoS in a WS-C3560CG-8TC-S version 12.2(55)EX2.It shows 0 traffic in class-map. Here is the configMy question is why I can not see the traffic via class-map?it should in the default Q if incorrect mark.I erased the confi...
Hi,I have a cisco 7606-S with dual RSP720-3CXL. Devices reloaded and now none of the RSPs are booting.When I have tried to take the console using only one RSP, card going to rommon mode after that it hangs. I guess its firmware is currupted. Can any ...
Hi,I would like to upgrade fwsm from 3.1(10) to 4.1(8).FWSM is install on 6509 and I just upgrade it to s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH8b.1. Can i upgrade fwsm directly form 3.1(10) to 4.1(8). Or i need to upgrade to 3.2(23) ?2....
Here is the scenario:When havin only the default VLAN everything works fine.when making a VLAN (Lets say 10) and choosing another switch for that VLAN as the Root Bridge (picture 4 the red line) it messes the whole network up.any ideas where to begin...
Dear All,Yeastarday, i have passed Switch Exam (route already passed 3 mounth ago) and only TshooT left to get CCNP certificate. That's why i am kindly asking you to share you experience how to pass TshooT exam.1) What materials and books do you reco...
Interesting scenario developed today...should be simple enough, but.....At home I connect to a Linksys router, that connects to my cox cable modem, to internet. I was going to try to upload a config remotely for an extreme switch, which its asking f...
Trunk link not working between 6500 switch and Sonicwall TZ 210 firewall. I'm trying to trunk 2 vlans from 6500 switch to port on sonicwall to allow Internet access to both vlans. All vlans are allowed on trunk link currently and on the Sonicwall i...
Hi all,I want to set ACL for both FTP servers so that both can act as FTP servers, can I set below ACL to acheive it ?Below is the network topologyFTP server A (192.168.0.1)-->RouterA ---Wan link ----Router B ----FTP server B (192.168.1.1)Router A AC...
Dear Experts,I have been facing a very strange issue with cisco access-lists.Here is the scenarioI have a biomedical server in vlan 100 ( 10.1.100.0/24) and domain client1 on vlan 101 ( 10.1.101.0). I've created an access list to allow traffic from c...
Hi everybody.I am little confused as to how to determine the diameter of a switched network. For e.g my one book defines diameter with in the context of stp as maximum number of switches a frame has to travel on its way to from source to destinatio...
Hi all, Basically we are having a Multicast setup. both A and B offices are being connected with STM-4 (622 Mbps) with IGP as OSPF. As of now everything is working well with this setup and no complaint .Now since Primary link bandwidth is touching ...
