Switching

I have ... vlan 1, vlan 10, vlan 20.  Internet firewall is 10.0.0.1One switch is configured Layer 3 which does the LAN routing for the network it has one static route (ip route 0.0.0.0 0.0.0.0 10.0.0.1).  configured with vlan 10 SVI as 10.0.0.254 and...

Device: Cisco SR520W-FE I have added a guest wireless network to this router but I can't seem to get nat overload to work with the new space. LAN: 192.168.5.0/24 (VLAN 75) Guest WLAN: 10.5.5.0/24 (VLAN 50)Here is the commands I'm using for the NAT ov...

Hi All, I am trying to backup the IOS from a Cisco 6506 SUP7203B but for some reason I am unable to do it for last couple days. I dont have access to the Smartnet for this Model so I wanted to save a copy of the IOS for a Backup. Here;'s the Error th...

I bought a new router I am having trouble configuring.  I am including the config for the new router and the old router that I am currently using.  I replaced my ip address with 99.999.999.99.  I would appreciate any help as to what I am doing wrong ...

hi,i have edge switch to which all my users are connected.Is there any command to get user's IP like we do in show cdp neighbors r is there any way to do it pleasw help on this!!!!!!!!!!!

Hello Everyone!I am writing you because i have a pre-sales problem to solve, we have one network in our customer site, where he receives two different ISP (in the remote Site), each ISP link has a router, one Cisco and other Teldat, client can not an...

Hello,Using one SGE2000 switch.I'm unable to access the switch web interface since I assigned a PVID to the port where my computer is connected.If I use the PVID 1 and untagging the VLAN 1, it works fine.What can I do to access the web interface with...

We are planning for the office move and I need to estimate how much power we need to run a fully populated Cat4507R switch. The chassis include 2 Sups, one 6-port fiber line card, two 48-port Gig and two 48-port FastEthernet line cards. The switch al...

Hi, I have a lots of cisco catalyst switches, and I need to find out wich switch has port with port-security feature disabled.I have a comand show port-security, but it shows me just enabled  port-security feature on ports, but I need opposite info, ...

Hello,I have have a WIndows 2008 NTP server running on my LAN and a test 1841 router and the router was syncing it's time fine, until I had to move the server to behind an ASA firewall.  I have opened up UDP/123 in each direction, but it still isn't ...

Hello,I'm working on trying to allow file and print sharing, a used being able to run a UNC path using windows to a server anc copy a file across. The server destination resides in a Vlan when the file and print sharing protocols are not allowe. I've...

im trying to find out what is the latest ios version for 3500xl switch for upgrade it . If anybody can help me because im not a register customer .thanks