Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Start a conversation

Resolved! 4507 subinterfaces

Hello,I'm trying to create a subinterface on the WS-C4507R+E (IOS 15.0(2)SG2, Sup 6L-E 10GE) but keep getting invalid input. switch(config)#int g5/11switch(config-if)#no switchportswitch(config-if)#int g5/11.20                                    ^% I...

Resolved! VTP Domain Propagation

Hi All,Let say I have two 48 ports switches, one vtp domain set as "site1.example.com", another vtp domain set as "site2.example.com". Both switches has VLAN 201 to 248, assigned to port 1 to port 48. VLAN 201 to VLAN 245 in switch 1 are assigned to ...

limlayhin by • Level 1
  • 1292 Views
  • 7 replies
  • 0 Helpful votes

redundant mode

On a 4500 switch having a single sup engine, another sup engine was installed to act as redundant one.the redundancy mode was changed to sso, thereafter the secondary sup was prompted to be reset.After it came back up again, the redundancy status sti...

suthomas1 by • Level 6
  • 2139 Views
  • 9 replies
  • 0 Helpful votes

Resolved! 2610 No Internet Access...

I have a Cisoc 2610 connected to my network, 1 Ethernet port and a WIC-2T card.  I have ther serial connection to the main router and the ethernet going to the switch. I can ping all device throught the network...but the 2610 can't ping any outside a...

jwood1650 by • Level 1
  • 1229 Views
  • 11 replies
  • 0 Helpful votes

Resolved! CAN ANY ONE EXPLAIN ME PLEASE

HI ALL,     AND Thanks in Advance,,in my network we have one core Switch 6509 and 17 Catalyst 3750-48ports  Switches,  devided by floor wise with the fiber connections  only single link in each floor we have 3 switches with stacking and two floor onl...

cbac to zbfw

considering migrating our isr's from cbac to zbfw.  Is there a compelling business reason to do this.  Is cisco going to end support for cbac. 

mialbert by • Level 1
  • 475 Views
  • 1 replies
  • 0 Helpful votes

Quick Vlan Trunk Query

Hello,I recently made change on a switch stack.It was simple case of adding vlans to a switchport trunk.The command used was:-switchport trunk allowed vlan add xWhen the vlans were added, they removed the old vlans and caused a major outage.I know I ...

Cat4506 Chassis with Cat2955

I am looking some advise on what direction I should persue for an expansion to my network.Currently I have a Cat4506 chassis with a Sup II+ engine and one WS-X4232-RJ-XX linecard with the WS-U4504-FX-MT daughtercard to provide uplinks to four Cat2955...

Cannot ping next hop

Hi all, I just got a new 1760 router, I have an issue.My FastEthernet 0/0 interface uses DHCP and got 172.16.2.126 /16.My Ethernet 0/0 interface is my internal interface, it has static 192.168.0.1 /24.On the Ethernet 0/0 interface, I have a PC attach...

alex39481 by • Level 1
  • 1754 Views
  • 1 replies
  • 0 Helpful votes

WS-C3750X-12S Dual DC Power Supply

Hi all,Can the WS-C3750X-12S support DC Dual Power Supply? By the data sheet I do see it comes with a Slot for a secundary power supply, although you can install a DC power option, I kind of need for the device to support 2 DC power. Is this possible...

yzeledon by • Level 1
  • 1275 Views
  • 4 replies
  • 0 Helpful votes

SRW224P trunked to SRW208P, VLAN setup?

I'm trying to have VLANs trunked over a single connection between an SRW224P and SRW208P switches, but I don't seem to be having any luck.Is there a how-to document anywhere to making this work?I'd also like to eventually add SLM2008 switches, and ma...

w_smith by • Level 1
  • 586 Views
  • 2 replies
  • 0 Helpful votes

Resolved! OSPF Redistribution Question

Hi,When redistributing routes from one OSPF process to another on the same router with no route maps filters, etc, shouldn't you see the same routes in the type 5 section of the LSDB?Our LAN routes come into our service provider's router as external ...

Problemens with SRW208

Good Afternoon:I’m Jaime Ponce, am engineer support  in Claro Honduras, we have a some switchs model SRW208 and we have a problem with the management when we connect it to the methro-ethernet network and when we want enter the switch remotly we can’t...

by • Not applicable
  • 327 Views
  • 0 replies
  • 0 Helpful votes
View All
Review Cisco Networking products for a $25 gift card