Switching

HelloI desire to know why a pair of Cisco Nexus 5020 Switches can connect up to 576 servers (12 fabric extenders)??I would like to know the reason technically because i don't understand how many ports is used by each extender for connecting to the sw...

I m having cisco 2610 router with 1 wic 2 T card with 2 slots(where already connected 2 leased line). Is it possible 2 have 1 more wic 2T card with 2 slots so that we can have 2 more leased line on that router..

Anyone know how to configure udp port forwarding for specific ports/vlans on the Nexus 7010?I looked through the config docs, but could not find any reference to the udp port forwarding feature.-Nate

Hello guys,Do you have any solution for vrf-aware dhcp-relay on 6500-sw that running 12.2-23.SXI IOS?Best regardsHieu Nguyen

I am  seeing lot of  deadfeed  on my line card crash file ..can you analyse and  let me knowwhat it meansAjai

I need to add additional license for DCNM to monitor all VDCs.  I am trying to update the license but update fails with message "Updating license failed: License is in use".  Is there any way force a license to update?

Hi all,I have a question with regard to L2 and L3 throughput capacity. Let's say I have a 3750G which has 32 Gbps switching fabric. Does this mean 32 Gbps at L2 only or L3 as well? For example, I have 20 SVIs configured on the switch (as opposed to r...

Hi,I have ASA firewall. The Interface is trunk containing 2 vlans (vlan100 vlan 200). That interface is connected to 3750 switch. On the 3750 switch, the vlan 100 and 200 are configured as private vlans which has some isolated and community ports. Ho...

Hello;I am looking to define a PBR to a number of different gateways based on first the verify availability and then based on source IP address match.I currently have PBR setup to change the default gateway based on the source IP Address defined in a...

I have a new 811G with a Sierra Wireless CMDA card (Verizon). After setting it up I can telnet into the router and ping both WAN sites and LAN connections but I cannot ping anything on the WAN side from the LAN side. I assume it's a simple configurat...