I have a 6509 switch with a WS-X6716-10GE blade. I am trying to configure some ports for dot1q trunk, but am not able to. I don't see an option for trunk encapsuation. Am i missing something?
We have a 3750 switch and can't enter rommon. The password recovery functionality is enabled, and we tried connecting with hyperterminal on both a Dell Inspiron laptop and also tried a Dell 2970 running Windows Server 2003.After bootup starts, we tri...
Need to add new blade, currently only use 6748, my only spare is 6548. I know it can utilize sup720, but will it degrade performance at all with the other mods?
Hello Evreybody,I have this problem:I have 4 VLAN in the 3500 Switch, Also DHCP Server, The route between VLAN's are OK.A PC in the VLAN40 get a valid IP Address, 10.0.40.x/24, my Default Gateway for Internet is the ASA that have 10.0.10.3/24, I conf...
Hi All,I would like to clarify what happens to traffic flow when there are mismatched OSPF link costs (see topology diagram attached).On the diagram, traffic from Network A to Network B will first hit R1, I assume that as the OSPF interface cost to R...
I have two different and both large VTP domains. I have two VLANs (VLANs 58 and 59) that I need to "extend" from one VTP domain into the other. I do not need x-VTP domain VLAN management.The border switches are both 3560Gs. Connecting them together...
Hi ExpertsI have two 3560 switches which i would like to connect through GBIC portsplease let me know what commands required to config these ports lets assume connecting ports 28 togatherany help would be appreciatedThanksAsif
Hi,Can somone please assist me with this request:I have a Cisco 871 for a client of mine that I can ssh to. I woule like to be able to manage it with https.I am not too familiar with IOS CLI and woule be more comfortable with Cisco SDM.Your helop is ...
I've just inherited a bunch of work from another employee who was let go (I now know why). One of these new tasks is to fix 3500 XL switch that he did a write erase and delete flash:vlan.dat commands on, but no reload command. The result is a switc...
I am having trouble pinging through my 3550 Core Switch, my CS is linked to 5 other 3550 switches via fibre.What im trying to do is to ping my remote site which is on another subnet. I am able to ping and tracert my core switch how ever I am unable t...
Hello AllIm considering connecting several switches to a 3750G-12S switch - but Im un-sure how many would be appropriate -?My concerns is the inner capacity of the 3750G-12S, allthough it has 12 SFP ports can it handle 11 switches connected to it? -t...
Been trying to find information about this.As I understand, with my SUP720 in the 6509, I can configure up to 256 unique hsrp group id's (standby group id).With several vlan's configured, they can be configured with different hsrp group id, same hsrp...
Hi All,I am CCNA. I've setup a small business network in an office with one Cisco 877 ADSL Router and a Cisco 2924 Catalyst switch. The internet connection has 4 MB downspeed. During the course of time i've got complaints from users saying that the i...
Hi,I need some assistance with an issue I am looking at. We have a pair of 6509 switches, each switch is connected together with a port channel. Attached to each switch via another port channel is a Nokia firewall. The 2 nokias are running VRRP. The ...
Hi All,This is regarding the GLBP and till now I know that this is Cisco prop. protocol but when I read the CCNP TSHOOT book by Kevin Wallace it says GLBP is not Cisco prop. protocol on page 122.can anyone clarify on this !!!Thanks,Hemant
