Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

I have a number of 3750G-12S  based switches in a stack that connect to a number of 3550 edge switches via fibre. All the ports on the 3750 are set in trunk mode and there are 25 vlans set up that uses VTP for vlan  management and uses the default VL...

whelanj by Level 1
  • 10877 Views
  • 11 replies
  • 0 Helpful votes

Hi,My name is Sandeep and I am facing very weird problem with my 2960 switch. I have configured my Juniper firewall interface with the ip 10.11.89.5/24 and connected it to 2960 switch port. The default VLAN created on switch is carrying ip address 10...

We've been experiencing for a while now issues with discarded packets on an interface on a 3750, this interface has a server attached that does backups on a nightly basis across our WAN.When I look at both the interface on the server and the interfac...

jonhill by Level 1
  • 4159 Views
  • 6 replies
  • 0 Helpful votes

Resolved! 3750 clock

We have several 3750G-48PS switches that we recently configured as stub routers for some buildings identified as mission-critical. This decision was made to enable the simultaneous utilization of the redundant uplinks. It is also a requirement that w...

OSNAFBCCO by Level 1
  • 2398 Views
  • 3 replies
  • 0 Helpful votes

Hi All,We have 2 sites(A and B) in london and are merging into one site A. Switches from the site B will be reconfigure for site A subnet. We are also extending site A from 3rd floor to 5th floor.we are using 10.9.1.x in site A. Plan is to use fibre ...

205000jag by Level 1
  • 529 Views
  • 3 replies
  • 0 Helpful votes

I'm having an issue which I believe is either HSRP or STP. I have 2 - 6513s as my core switches with VLAN interfaces and spanning tree configured as in the example below:Core 1interface vlan 100 description XXX ip address 10.123.100.2 255.255.255.192...

dasmith58 by Level 1
  • 1214 Views
  • 3 replies
  • 0 Helpful votes

Hi AllI have 10 cisco Switch 3750 in LAN. All these are in connected in Ring. All those are configured with multiple VLAN's and Routing is also enable. I want to enable STP on all these switches. In case if any links drop between two switches and aut...

Guys,can you please advice me with a switch selection ? I have a 7204 vxr router , that i need to connect with a switch , now as per my client they will be using a high no of Ip addresses ( around 120000 ip's  -- using around 90000 - 100,000 most of ...

HiI have a friend who rents out 14 small offices to small companies.He has asked me to help him setup the network infrastructure, however I have some questions that I hope you could help answer.All the offices are already cabled back to a central rac...

mes by Level 1
  • 654 Views
  • 4 replies
  • 0 Helpful votes