Switching

Hi all,Is there any issues in creating  duplicate ether channel group number  in the same network but different switch.For example I have a core switch connecting two buildings which have 3 access layer switchesFirst BuildingSwitch 1 :Ether channel g...

Hi AllWe are standardizing on AUX port configurations for thousands of end routers.. The understanding that Im in is - incoming calls to modems on AUX port would work only if we have the "modem inout" command on the line aux.. Is that right ? My ques...

I am looking for a document that states the WS-C3750G-24TS-E1U is compliant with the harmonic spec. EN 61000-3-2.

Hello all...first post to these forums.I have two issues.  Hopefully all of the below is explained coherently, please let me know where I might need to provide better clarity. Here is the setup:Cable Modem --> PIX 501 ---> Patch Panel ---> workstatio...

Hi, me again.I am in the unhappy situation to renumber my vlans.I would like to cross-connect (bridge) the old-vlanswith the new ones (without plugging cables)so the client-ports may migrate smooth .Problem are not the access-ports, butwhen dot-q tru...

HiI'm just checking if this works though I suspect the answer will be no.Story is that I recently moved all my L3 interfaces from my two VSS switches to a dedicated core switch. Core switch is reporting both L2 and L3 netflow just fine but I'd much l...

Hi.I want to upgrade IOS MZ to K9 series.caoud you help me what precousion i have to take while upgrading IOS.

How can I determine why my Cisco 2811 router decides to reboot itself without any apparent intervention? We've check electrical, cables and etc.

Dear Cisco diehards I have a question, and can't find the answer of it. To make a long story short....The company i work is using a Cisco 10K for configuring xDSL lines. I would like to know if it is possible to make a specific interface configuratio...

Sometimes we find in the syslog of a Nexus 7000 running (NX-OS) Software Ver 4.2(2)this message:May  7 07:02:40 d16-lo0 : netstack[3361]: Worker thread exitting.. > 32We found no info in the cisco documentation about the meaning of such message.Could...

Hey everyone,Our current network is comprised of about 50 Cisco switches, all C2950s or C2960s, with a C6500 and C3750 stack at the core.Because our network had components from another vendor, the previous network administrator decided to use VLAN 1 ...