Switching

Hi,I have an situation that I need advice/input on.There are 25 switches in a building all Cisco.At the core of the network is a stack of 7 Catalyst 3750's which have EtherChannel uplinks to all the outer switches.The core switch also serves as the d...

Hi all!Qustion about 877 K9 dls router.I have 2 vlans: 10.10.10.0 255.255.255.240, switchport FE0  and 10.10.20.1. 255.255.255.240 switchport FE1.for my dsl link i use IRB config with dinami ip address.internet connection works for both vlans.I have ...

Hi all,I inherited a fairly large network.  Dual 6513's with single fwsm's.  When I log into the switch we have 8 vlans configured.  I am really confused on how to get started.  What I think needs to be done is first the vlan is created on the switch...

Cisco Catalyst 2940-8TF, there are two fiber option 1. mtrj interface 2.sfp interface.I have nothing plugged into the sfp gig port. The mtrj port always says disabled, but I can't seem to enable it. Why?

Hi,I am newbie and I am at college.I like to ask you a question:How VTP support multiple VLANs across mutiple switches?Thank you for your time.M

Hi All,I have a 2950T switch which has 2 giga ethernet ports. There is one deployment I must use multimode fiber to connect two switches. I want to use 2950T for the deployment. But this switch doesn't have optical interface. I wounder whether we hav...

Ive got a scenario where i have two 3750g-24 switches that i need to connect to two 3750g-12 port fiber switches. I know i can matrix the 24 port switches together but what about the 12 port fiber switches. Can i connect those via a matrix cable so t...

Hi allIm having a few issues with some voip call's bad quality etc, is there any free tools out there where I can get some diagnosis?cheersCarl

I have two switches A and B connected together through two trunks A1  ---- B1, and A2 ---- B2. present the root bridge is A, and all the ports  are forwarding. As for B, the root port is B1, and B2 in blocking. My  question is how do I make B2 forwai...

*this is all in a test environment*I have an ASA 5505. One of the interfaces has IP 10.3.0.1. Behind that is a server with IP 10.3.0.2.The outside interface of the ASA has IP 10.0.0.1, to which 2 branchoffices are connected.(Two other ASA 5505's with...