Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

We already have a system that is using a SPAN port, and we're about to implement an IDS with 3 sniffing interfaces. Unfortunately, all network devices are plugged into our two 6500's that are running as VSS, and we need a total of 4 SPAN ports. I'd p...

baskervi by Level 1
  • 1225 Views
  • 2 replies
  • 0 Helpful votes

Resolved! 3750G T Issue

I have a 2 3750G 24T's that are connected via Stackwise cables that has recently started kicking out some errors and I cant seem to make heads or tails out of them.  Here are the errors:Mar  1 11:05:30: %LINK-3-BADMACREG: Interface StackPort1, non-ex...

jonesl1 by Level 1
  • 1438 Views
  • 3 replies
  • 0 Helpful votes

Hey allI am having some trouble getting my head around this concept and I just want someone to explain if they can, before I pull my hair outAssume I have the following config on my switchinterface FastEthernet0/1 switchport access vlan 10 switchport...

Hey Guys,So I'm about to throw up some policy based routing on my core switch and wanted to ask for a second pair of eyes on my config so I don't really mess things up. This is what I'm planning to throw on my 4507 to send traffic for my specific hos...

Hello everyoneI am confuse about the routed port on layer 3 switch , Can someone please help me out why we have to configure routed port on the layer 3 switch .As we all know that layer 3 switch can do VLAN routing then we need to configure routed po...

Hi all,I usally have problem in setting boot variable in chasis based switches(single or redundant sup) or 7600 routers.confused with sup-bootdisk, bootdisk, sup-bootflash, disk0, system flash, boot flash... etc.What decides to set up correct boot va...

We have an old 5500 that has been acting as our vtp server for years.  we plan to remove the 5500 soon.  We have an 6500 that is running in client mode now, we wish to reverse the roles of the 6500 and 5500.  Making the 6500 the server and the 5500 t...

broow by Level 1
  • 1209 Views
  • 8 replies
  • 0 Helpful votes

If I have two VDC on each nx7000How many cables I need to connect them all ?I heard one pair(two physical link) for each VDC ?!?So I will need four physical dedicate links ?!ThanksJohnson

jchan by Level 1
  • 1437 Views
  • 4 replies
  • 0 Helpful votes

Hi all, We have multiple VLAN's with one DHCP server. I have configured what I think is correct to get different VLAN's picking up a dhcp address from the VLAN with the DHCP server in but, it doesn't seem to be working. Here is the config. (VLAN 10 h...

we have two 6500's on two campus separated by a mile with aerial fiber connecting the switches.  We have contracted with a local provider to supply a redundant fiber path.  We pay a monthly fee to have the fiber and will pay an additional fee if we h...

broow by Level 1
  • 1708 Views
  • 11 replies
  • 0 Helpful votes

I'm having a very frustrating issue with a 2821 router. Its configured with zone-based firewall, URL filtering, ssl vpn...etc..Very long configuration. Problem is, it no longer will allow me to save the configuration. I tried write erase, erase nvram...

Aaron D by Level 1
  • 2282 Views
  • 9 replies
  • 0 Helpful votes

Hiwe have 6509 switch working as Core which is connected to Juniper firewall and running ospf over the point to pint connectivity.the firewall is giving default route in ospf to core switch while core switch is providing lan sisde routes to firewall....

sameermunj by Level 1
  • 1430 Views
  • 12 replies
  • 0 Helpful votes

Resolved! NATing

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094837.shtmlThe link above is to Cisco's webpage for "NAT: Local and Global Definitions." I have a question about the section where it talks about "Define Outside Local and O...

Hi all,I have a question that I have always wanted to know, why is it that  manufactures such as HP, Dell, Extreme Networks, 3com – they all list  similar products with a much higher switching fabirc and mpps when  compared to Cisco? Are the other ma...