Switching

Hi Folks,Apologies if a duplicate thread.I know that that there is a show mls qos int stat command on the 3750 that is pretty cool to view the stats. But is there any such commands in 6500.I am implementing a QOS model based on the dscp so would like...

Hi:I have a 3560 24TS Switch with a Ipservices image. I receive a Internet service on this Switch, i have 2 Vlan, one Vlan for CLIENTS and one Vlan for Administrative Network. I want to limit the traffic to the CLIENTS Vlan just to 5MB, and 5MB for t...

I have a 6509 switch with 7 48 port gig blades completely full and am wondering if it is being overloaded. There are about 40 servers running gig and the rest is workstations/ip phones at 100 meg. All are on a single VLAN.What I am seeing when I run ...

Hi all,I've a cisco 6506 IOS SRD with a SIP-400 4GE module.I've configured one giga interface in L3 trunk with different logical IP sub-interface: on sub-interface I've configured Hierarchical-Policy (shaping + CBWFQ/LLQ).Now I need to limit the trou...

We are trying to test err disable recovery on Cisco 2960 switches. Here is what we have connected:Cisco 2960-24TC-S --> Cisco 2960-24LT-L --> Asante 8 port (dumb hub) --> pcWe have done to following to make the port on the Cisco 2960-LT-L fail (err-d...

Hi,I am trying to upgrade Sup32 on 6506-E modular IOS from 12.2(33)SXI to 12.2(33)SXI3.  However, after loading the base image for 12.2(33)SXI3, install command is not available.  Has anyone seen similar issue?Thanks.

Hi all,I think I can understand IGMP snooping when there is a router on the LAN. But what about a group of hosts simply connected to a layer-2 switch (capable of doing IGMP snooping)? If there is no router connected, are IGMP messages sent? To who? I...

in manuals that describes wccp redirection it isdescribed something like thisinterface inputip wccp 61 redirect in!interface outputip wccp 62 redirect in!can I use this configinterface outputip wccp 61 redirect outip wccp 62 redirect in!instedad of r...

hello, This is my first time here but i hope that i can get some help,So here we go, I am taking the CCNA courses right now in college and we are doing a project, i have set up the DHCP service to run on R1 and have 3 subnets connected to it through ...

Hello,I'm checking port stats on a switch. On several ports, I see some CRC and other errors. The error percentage is usually something like one error out of one thousand packets.    Can this be considered normal? Should I worry about this?Thanks!

we removed a switch 3750 from its stack, after that, the switch boots well like a standalone switch, but it gets soo slowly for example when i want to see its configuration through the console port (sh run), i review the sh switch, and i am still see...

Hi Pros,             I been working on this projet,but I got for days on the samething. Wireless client is able to associate to the WAP,but cannot get an IP address from the vlan associate to the ssid. The routers displays the following message:SSID[...

Hello Cisco Forum Users,I have a Customer with 6509 getting the following logging message.Feb  9 23:31:06.622 PST: DFC1: EARL Vlan Statistics Process: No iccshim packet createdFeb  9 23:35:06.809 PST: DFC1: EARL Vlan Statistics Process: No iccshim pa...